SKU: N/A Category:




chace-ward-trolleyThe hot-holding ward trolley was designed specifically for hot-holding and transportation of plated or bulk food products at safe temperatures, while minimising deterioration or drying-out of the product. This is achieved by using the unique Blankett~Heat heating system. The trolley can also be used as a plate warmer.

The standard units are manufactured using type 304 stainless steel for the inner cabinet and type 430 stainless steel for the outer covers. Model PD2/2H has a double cabinet, each cabinet has a robust, single drop-down door with specially designed stainless steel hinges and each of these cabinets is designed to hold one removable stainless steel tray or plate rack which is used to accommodate the Gn. Pans, grids or 23cm plates. The sides, base, top and door of the cabinets are effectively insulated to prevent heat transfer to the outside atmosphere. The cabinets form an integral unit with a support frame manufactured from square tubing stainless steel. This support frame is welded to an underframe of mild-steel coated angle-iron, which forms the base to support the four castors 160mm in diameter (2 swivel). The ward trolley includes a unique brake system which consists of a robust stainless steel foot-pedal, which, when engaged, locks both rear wheels simultaneously and with a single action. The trolley includes a stainless steel push-handle, lower shelf with retaining rail manufactured from stainless steel and rubber bumpers mounted on the lower corners of the trolley frame.  Trolleys are supplied with a single phase removable cable.

Trolley is available in the following models;

PD1/1 – Single door, one heated compartment to hold 24 x pre-plated meals or 6 x Gn1/1 pans of food 65mm deep.

PD2/1 – Double door, one heated compartment to hold 24 x pre-plated meals or 6 x Gn1/1 pans of food 65mm deep.  One ambient compartment to hold 24 x plated cold meals or Gn1/1 pans of food 65mm deep.

PD2/2 – Double door, two heated compartments to hold a total of 48 x pre-plated meals or 12 x Gn1/1 pans of food 65mm deep.

Optional Extras:

  • Enclosed bottom storage compartment
  • Marine edge to the top of the trolley

950mm.wide x 700mm.deep x 1400mm.high


Additional information


PD1/1, PD2/1, PD2/2


There are no reviews yet.

Be the first to review “WARD TROLLEYS”

Your email address will not be published. Required fields are marked *